Maintenance methods of various equipment in organic fertilizer production line

0
15

When the fertilizer manufacturing equipment produces and processes organic fertilizer, it will also be corroded and worn. Therefore, after the organic fertilizer equipment has been used for a period of time, it must be overhauled to avoid potential problems as soon as possible, and do not wait until it is completely unusable to check and repair, which will delay the production. The following describes the maintenance methods of various parts of some fertilizer equipment:

1. Bearings. The shaft of the organic fertilizer crusher bears the full load of the machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the life and operation rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good. The main oil injection points of the machine are: a. Rotating bearings; b. Roll bearings; c. All gears; d. Active bearings and sliding planes.
2. If the rotating gear of the organic fertilizer granulator machine is running, if there is an impact sound, it should be stopped immediately for inspection and eliminated.
3. The newly installed wheel tyres are prone to loosening and must be checked frequently.
4. Check whether the screw

0

LEAVE A REPLY

Please enter your comment!
Please enter your name here